MC-Injekt 2033

Fondaproof® A
 

Cementitious waterproofing.

Application:

1-Component waterproofing solution containing penetrating crystallization additives that seal the concrete and prevent the penetration of water for swimming pools, retaining walls, foundations, underground structures, tanks, baths, wells, tunnels, etc. and surfaces.

Characteristics:

There are remarkable adhesion to building elements ensuring their
waterproofing, even under extreme environmental conditions. Resists
negative hydrostatic pressure. Protects concrete from corrosion.

Specifications:


Drying time (at 20 ° C): 1-2 hours
Working time after mixing: 3 hours
Minimum working temperature: 8 ° C
Consumption: The cost depends on the profile of the surface roughness of the substrate and application thickness layer approximately 2-3 kg/m2 for two layers

Method of application:

Substrate: The substrate must be clean, dry, dust-free without
oils and other not well attached to her material. Cavities or other
shortcomings need to be processed.
Preparation of the mixture: Pour the minimum amount (6l) water in a suitable container for mixing. While stirring slowly, add the total amount of dry matter to water. Then adjust the consistency by adding water slowly to reach its maximum amount. Stir well for at least
3 minutes to obtain a homogeneous mixture. Allow the mixture to stand for 5 minutes and then mix again for 10 seconds.

Application:

Apply the mixture with the help of a spatula, preferably in two layers.


Shelf life:

18 months in original sealed packaging in dry environment