Revinex® Flex 2006 - Cementitious elastic waterproofing

Elastic cementitious waterproofing system.

Application:

· For surfaces under tiles in swimming pools, terraces, bedrooms, bathrooms, kitchens

· Shafts, water tanks (also drinking water) beds, silos

· Underground, interior and exterior surfaces

· Tunnels and bridges

Features:

• It offers high elasticity, impermeability and protection of all vertical and horizontal surfaces subject to vibration, extensions or chemicals
• Outstanding adhesion to many substrates such as concrete, cement slurries, bricks, metal, plasterboard, polystyrene, mosaics and ceramics
• Certified for use in tanks with drinking water
• Protects reinforcement corrosion and improves traction in reinforced concrete shell construction
• vapor permeable, protects concrete from carbonation, prevents underground radon and migration of chloride
• Resistant to positive and negative hydrostatic pressure, resistant to low temperatures and snow

• Economical and easy to use, even by non-trained personnel
• crack bridging pores and thin joints
• Environmentally friendly

Technical characteristics:

Exceeds the requirements of EU Norm ΕΝ 934-3, Table 3
Compressive strength (EN 1015-11 / 99): 14,0 Mpa
Flexural strength (EN 1015-11 / 99): 4,1 Mpa
Penetration resistance (EN 1015-09): 18,43 Ν / mm2
Tensile strength (28 days DIN 53504 *): 9,61 Ν / mm2 * with glass fiber network
Elongation at break (DIN 53504 28 days): 16,8%
Mixing ratio (by weight): 70% Α-30% Β or 2.4: 1
Color: gray
Suggested consumption: 2-2,5 kg / m2 for two coats
Time: 30 '
Minimum application temperature: +5 οC
Drying time of each layer: 8 - a 10:00
Note: drying time is extended at lower temperatures and moisture, and is reduced by higher temperatures